Información en movimiento

Home page News Room Información del sector

Todo lo que necesita saber antes de elegir circuitos optoacopladores

2022-08-01

The optocoupler, also known as an optoelectronic isolator or optocoupler, is a semiconductor device allowing two isolated cOtras materias to transmit an electrical signal. Featured with circuit isolation, signal transmission, and circuit control, it applies to intelligent appliances, industrial manufacturing, digital communication, aerospace, transportation, and power supply. Apart from this basic information, the optocoupler circuitTodavía tiene mucho más para que la gente sepa. El artículo introducirá circuitos optoacopladores en diferentes aspectos, incluyendo sus tipos, estructura y características, ayudando a la gente a entender mejor el optoacoplador.

4Common Types de Optoacopladores

The optocoupler circuit is mostly categorized into four types based on the different photosensitive devices: La República federal de Yugoslavia, Photo-Darlington (en inglés)., foto-scr, and Photo-Triac. Due to their different features, they are applied to different optocoupler application scenarios.

  1. La República federal de Yugoslavia

The La República federal de Yugoslavia optocoupler uses an IR LED as a light source and a photo-transistor as a light sensor or light receiver. Because of its widespread current transfer ratio, it is preferable to DC cOtras materias.

  1. Photo-Darlington (en inglés).

There are two transistors available in Photo-darlington. Similar to the La República federal de Yugoslavia optocoupler, Photo-Darlington (en inglés). also can be applied to DC cOtras materias, with its current output reaching up to 600% of the input current.

  1. foto-scr

There is SCR (Silicon Controlled Rectifier) used as the detector in the foto-scr optocoupler. When the light falls upon the gate of SCR, it will turn on. However, the switching speed of foto-scr is slow or medium, making it more suitable for moderately high voltage AC systems.

  1. Photo-Triac

Photo-Triac, the solid-state AC switch, consists of an LED and two thyristors. Compared with foto-scr Optocoupler, which only allows current flow in one direction, Photo-Triac allows flow in both directions. As to its application, it is mostly used to control higher voltage AC cOtras materias.

SLa estructura deOptoacoplador COtras materias

Un optoacoplador generalmente comprende dos partes: un LED y un dispositivo fotosensible. Específicamente, el circuito optoacoplador consta de 7 componentes: transmis, receptor, marco de plomo, alambre de Unión, cola protectora IR, cola blanca de embalaje y cola negra de embalaje. Aquí está su estructura.

FNaturalezas deOptoacoplador COtras materias

  1. Pequeño Size

This feature enables optocoupler cOtras materias to adapt to more integrated cOtras materias. For example, our 817 optoacopladores are tiny, with their size reaching 6.4×4.6×3.50, making them widely used for various applications.

  1. rápidoResponse

The response of optoacopladores can achieve in milliseconds or even microseconds at the maximum level. Our optocoupler cOtras materias can achieve such fast speed, improving working efficiency.

  1. altoREstado miembroShock

The isolation voltage refers to the maximum voltage that can be applied across the optocoupler circuit while ensuring electrical isolation. The higher it is, the better resistance to shock it brings. Generally, the isolation voltage exceeds 1kV, but our 817 optoacopladores can even reach 5kv, showing high resistance to shock.

  1. Bien Anti-interferencia Ability

This can be achieved with good insulation ability existing between output and input. Our optoacopladores can ensure high resistance to shock and anti-interfere ability.

El Optocoupler más aclampor referencia

Worth mentioning is that our 817 optocouplerTiene otras características brillantes que lo hacen el muy aclamcircuito optoacoplador, aparte de tener las características mencionadas anteriormente.

  • CTR (Current Transfer Ratio) diseño

In terms of the design of optoacopladores, attention must be paid to CTR when designing. Otherwise, the output may be so small that optoacopladores may occur malfunction. Adhering to this principle, we have developed our 817 optoacopladores with the CTR at a minimum of 50%, with IF of 5mA and VCE of 5V, ensuring the safety and performance of optoacopladores.

  • Cumplimiento de las normas

Nuestros productos son de primera calidad, incluyendo nuestros productos de optoacopl817. Hasta ahora, ha pasado varias normas. Por ejemplo, ha superado la prueba UL, lo que significa que nuestros productos de circuitos optoacopladores están construidos correctamente para la mayor seguridad.

  • ampliaRange of Application Scenarios

Our 817 optoacopladores are applicable to home appliances, vending machines, chargers, power adapters, light control, smart meter, etc., satisfying different needs for different industries.

conclusión

Un circuito optoacoplador de buena calidad no puede maximizar sus efectos sin un proveedor confiable. Con tantos proveedores en el mercado, Refond es uno de ellos que goza de una buena reputación entre los clientes. Basados en años de experiencia en ofrecer soluciones y productos de embalaje LED, somos capaces de ayudar a los clientes en todas las industrias a satisfacer sus necesidades.

Navegación rápida

Póngase en contacto con nosotros

Centro de descargas

Sala de prensa